Showing all 17 results
HAND TACHOMETER
download pdf file The TM-5000/5010 series is a hand-held Non-Contact/Contact Tachometer. It measures rotational and linear speeds of upto 99,999.9 rpm and measured value can be converted instantly to different units of measurements (RPM, RPS, m/min, cm/s, inch/s, ft/min and yd/min). Up to 8 measured values can be stored in internal memory. Measuring in hard to reach places is possible with the use of the Remote Sensor. Portable and very handy, no special skills required to use. Available in Kit type which includes everything needed to get you started.
Temperature & humidity measuring instruments
download pdf file The TC-950 is a multi-type probe (K,J,T,E,R) thermometer in a single unit. This unit is equipped with a probe type selection button to accomodate different types of probes to make proper measurements. With a measuring range of -100°C - +1700°C and an accuracy as high as ±0.2% of reading +0.5°C, the TC-950 is truly a univeral thermometer. Display resolution is 0.1°C (1°C for R-type), the large LCD and 15mm digit sizes gives optimum viewing to the user. The front panel buttons have a tactile feeling for a confident usage. The Max/Min temperature readings in a cycle can easily be recorded with the push of a button. The Hold button will momentarily freeze the display to give the user enough time to record the reading. Relative temperature measurement is possible to measure the variance from a reference point. Data can be recorded into a PC via the built-in RS232C serial interface. The TC-950 is battery powered and has an Auto-Power off feature to ensure longer battery life. The unit is also equipped with a foldable stand for use in desktops.
Hand tachometer
download pdf file The TC-6000 is an entry level infrared thermometer that measures surface temperatures of -30 - +550°C. It allows non-contact measurement of object surfaces which is perfect for a non-invasive temperature measurement. This is also useful in measuring hard to reach targets or when the surface has a very high temperature. The TC-6000 is very handy and ergonomically designed to fit snugly into your hand for easy measurement. It has a 3.5 digits LCD display with backlight and measurement is easily done by pointing the laser sight mark to the target and pressing the trigger. Releasing the trigger will hold the measured value on the display. The TC-6000 measures in °C or °F in 1/0.5°C display resolution. It has an accuracy of ±2% rdg or ±3°C, whichever is higher. The unit is equipped with a laser sight market that has a field of view of Փ100m at 1000mm distance. The TC-6000 is powered by a 9V battery and comes with a protective plastic case.
Digital thermometer
download pdf file The TC-6000 is an entry level infrared thermometer that measures surface temperatures of -30 - +550°C. It allows non-contact measurement of object surfaces which is perfect for a non-invasive temperature measurement. This is also useful in measuring hard to reach targets or when the surface has a very high temperature. The TC-6000 is very handy and ergonomically designed to fit snugly into your hand for easy measurement. It has a 3.5 digits LCD display with backlight and measurement is easily done by pointing the laser sight mark to the target and pressing the trigger. Releasing the trigger will hold the measured value on the display. The TC-6000 measures in °C or °F in 1/0.5°C display resolution. It has an accuracy of ±2% rdg or ±3°C, whichever is higher. The unit is equipped with a laser sight market that has a field of view of Փ100m at 1000mm distance. The TC-6000 is powered by a 9V battery and comes with a protective plastic case.
MEASURING COUNTER
download pdf file The MWC Series is an economical length totalizer which can measure in Meters or Yards. It is available in 4 or 5 digits with digit size of 6.0 x 3.5mm in a large viewing display window. Choices of 1m(y) or 0.1m(y) display resolutions is available. The MWC series has a plastic housing and equipped with 2 measuring wheels for stability and accuracy. It counts 1 unit for every 3 revolutions of the measuring wheels upto a maximum count speed of 300 meter(yard)/min. Clockwise or Counter-clockwise count direction is available. The unit can be mounted via the plastic base and can be reset by turning the reset knob.
ELECTRONIC LARGE DISPLAY
download pdf file The G82 Series is a Large Display unit that is visible upto 20 meters. It has a dimension of 400 x 120 mm for a single unit and several units can stacked together to create a multi-display unit which can be used as a production floor display showing vital information of the production line like Target, Actual, Variance, etc. The G82 Series can display count values of smaller counters which are usually located in-line or in the central control panel/rooms of a production facility. This is very useful if certain information should be made available to the people in the production line.
ELECTRONIC LARGE DISPLAY COUNTER
download pdf file The G80 Series is a Large Display electronic counter visible upto 20 meters. It has a dimension of 400 x 120 mm for a single unit and several units can stacked together to create a multi-display unit which can be used as a production floor display showing vital information of the production line like Target, Actual, Variance, etc. It is available in 4, 5 or 6 digits in large size LED display with digit size of 57 x 33.4 mm. The G80 Series can be directly hooked to an input signal source like a photo sensor. It can accept Contact or Non-Contact input signals of upto 5kHz count speed. Count modes available are Add/Subract or Quadrature. Reset is done remotely via the terminal screw connections. The unit has a built-in memory for data retention even during sudden power loss. It is powered by AC100/110V or AC200/220V and an external power supply of DC12V is available for the sensors. Additional features includes Decimal Point Position and Input inhibitions. The G80 Series is housed in a heavy duty metal case and it can be hanged, base or wall mounted using the included brackets.
LIGHT METER
download pdf file The EL-1000 is a portable Lux meter which measures illuminance of a place like an office, shop, classroom, factory, green house,etc. It is an ideal tool in controlling or checking if the environment has enough brightness or illumination. The EL-1000 is a multi-range lux meter with measuring range of 0 - 19990 Lux. It has an accuracy of ±5% + 4d. The measured Lux is displayed in a 3.5 digits LCD display with a large figure size of 13 mm. Display has a resolution of 1Lux or 10Lux. The unit is battery powered and equipped with a Silicon Photo Diode sensor.
PH METER
download pdf file The EH-1000 is an economical hand-held pH meter. pH measurement is an essential parameter in monitoring and controlling different application fields such as Environment, Food and Beverage, Agriculture, Laboratory and even for Education, etc. The EH-1000 has a pH measuring range of 1 - 13 pH and it is very reliable with an accuracy as high as ± 0.07, this makes the EH-1000 your best tool for all these application fields. The pH measurement is displayed on a 3.5 digits LCD display with a large figure size of 12.5mm with a display resolution of 0.01 pH. It is battery powered which makes it very handy and portable. The EH-1000 has a standard glass electrode included for quick measurements out of the box. Other specific purpose electrodes can be used with the unit with the detachable sensor connection.
Anemometer
download pdf file The EA-1000 is a portable hand-held Vane Anemometer. It is a very economical and easy to use, designed to provide reliable and accurate wind measurements. The EA-1000 is a handy anemometer with a large LCD, 13mm figure size 3.5 digits display for easy viewing of measurements. The unit has a Vane type sensor and it can measure m/s or km/h units. Measuring range is 0.8 - 30.0 m/s or 2.8 - 108 km/h with a resolution of 0.1 m/s or km/h with an accuracy of ±3% or reading +2d. The EA-1000 is powered by a 9V battery which makes it handy and perfect for field applications as well as daily use. The EA-1000 can be used for wind speed measurements like outdoor sports (surfing, sailing, gliding, etc.) and industrial applications like HVAC monitoring, wind tunnels, etc.
PULSE GENERATOR LINEAR MEASURING
download pdf file The CT Series is a multi-resolutioin pulse generator for linear measuring. It is ideal for length measuring applications that demands high resolution measurement. The CT Series is available in 1m, 0.1m, 0,01m and 0.001m resolutions. It is equipped with 2 rubber wheels that converts rotational movement to pulses which can be fed to an electronic or electric counter to display measured value. Meter and Yard wheels options are available.
