| New Aerospace & Defense Products . |
|
|
|
|
|
|
|
| Rugged Downconverter with an RF Frequency from 1.5 to 18 GHz | |
Down Converter
from Mercury Systems
|
| The RFX-3190 from Mercury Systems is an RF Downconverter that converts an input frequency (RF) from 1.5 - 18 GHz to an output frequency from 0.5 to 2.5 GHz. It provides a gain of 30 dB (gain adjustment range of 20 dB) with a noise figure of 12 dB and image rejection of more than 60 dB. This downconverter has a tuning resolution of 10 kHz (optional finer resolutions) and a tuning speed of 2 ms. |
| |
Download Datasheet
Product Details | |
|
|
|
| SOSA-Aligned Multi-Channel SDR Tuner from 400 MHz to 18 GHz | |
Software Defined Radio
from Epiq Solutions
|
| The Sidekiq™ VPX410 from Epiq Solutions is a Multi-Channel Software Defined Radio (SDR) Tuner Solution that operates from 400 MHz to 18 GHz with an instantaneous bandwidth of up to 1 GHz. It combines four RF receive tuners with one RF transmit tuner to access more RF spectrum and supports both phase coherent operation and independently tunable operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| C-Band Radar Transponder for Sea/Airborne Military Applications | |
RF Transceiver
from Ultra
|
| The MD50C-5 from Ultra is a C-Band Radar Transponder that operates from 5.4 to 5.9 GHz. It is a miniature precision augmentation device used to enhance the capability of C-band radars. This transponder uses a state-of-the-art RF-to-video detection receiver which eliminates the need for typical IF down-conversion components such as the local oscillator, mixer, and IF amplifier. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3 kW L-Band Circulator from 1 to 1.2 GHz for Military Applications | |
RF & Microwave Circulator
from Smiths Interconnect
|
| The CA10001200P3KS from Smiths Interconnect is an L-Band Circulator that operates from 1 to 1.2 GHz. It can handle a peak input power of 3 kW, provides an isolation of more than 20 dB, and has an insertion loss of less than 0.30 dB. This circulator is U.S. ITAR compliant and is ideal for solid-state power amplifiers (SSPA) used across various military communication and radar applications like AESA radar, ground-based air surveillance radars, shipboard defense, and airborne fire control. |
| |
Download Datasheet
Product Details | |
|
|
|
| 63 W GaN Solid-State Power Amplifier from 2 to 20 GHz | |
RF Amplifier
from RF-Lambda
|
| The RFLUPA0220GD-B from RF Lambda is a Solid-State Power Amplifier (SSPA) that operates from 2 to 20 GHz. It delivers a saturated output power of 63 W (~48 dBm) with a small signal gain of 50 dB. This wideband amplifier is based on GaN technology and includes an auto-calibration feature to achieve maximum performance through time and temperature changes. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Portable Direction Finding and Spectrum Monitoring System from 500 MHz to 8 GHz | |
Direction Finding System
from CRFS
|
| The RFeye Array 125 from CRFS is a fully integrated, multi-mission direction-finding system for fixed, vehicle, or transportable applications with simultaneous DF, monitoring, and geolocation capability. It operates from 500 MHz to 8 GHz with 100 MHz of Instantaneous bandwidth. This is a fully integrated plug-and-play system containing a high-performance RFeye Node, spiral antenna modules, and high-speed switch and is available with an optional IP65 radome and mounting kit. |
| |
Download Datasheet
Product Details | |
|
|
|
| SP65T Absorptive PIN Diode Switch from 0.1 to 4 GHz | |
RF Switch
from American Microwave Corporation
|
| The MSN-65DT-051-DEC-MP from American Microwave Corporation is an SP65T Absorptive PIN Diode Switch that operates from 100 MHz to 4 GHz. It has an ON/OFF switching time of less than 150 ns, a rise/fall time of 50 ns, and provides isolation of more than 45 dB. This switch can handle a CW input power of up to +20 dBm and has an insertion loss of less than 15 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Mixer Die from 20 to 80 GHz for Military and Space Applications | |
RF Mixer
from mmTron Inc
|
| The TMC170 from mmTRON is an RF Mixer that operates from 20 to 80 GHz. It provides an LO power range from -3 to +3 dBm and has an integrated LO amplifier which eliminates the need for an external LO buffer. This mixer has a conversion gain of 0 dB and provides an RF-to-IF isolation of 80 dB. The balanced architecture of this mixer in LO, RF and IF ensures outstanding harmonic performance and the wide bandwidth of IF, LO and RF ports provides much flexibility in frequency planning and simplifies the design. |
| |
Download Datasheet
Product Details | |
|
|
|
| Absorptive SP4T Switch from 0.1 to 18 GHz | |
RF Switch
from Quantic PMI (Planar Monolithics)
|
| The P4T-100M18G-80-T-515-SFF-4W-IND from Quantic PMI is an Absorptive SP4T Switch that operates from 0.1 to 18.0 GHz. It has a switching speed of less than 200 ns and provides an isolation of 80 dB. This switch can handle an input power of up to 36 dBm and has an insertion loss of 4.5 dB. It is available in a radial module that measures 1.25 (Dia.) x 0.4 (H) inches with SMA-female removable connectors and requires a DC supply of +5 and -15 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| L1/L2 Band (C/A and P(Y)) SAASM GPS Receiver for SWAP-Constrained Applications | |
GNSS Module
from Mayflower Communications
|
| The NavAssure 200 from Mayflower Communications is a SAASM Receiver that is designed for SWaP-constrained applications. It supports L1 and L2 (C/A and P(Y)) bands simultaneously with 12 tracking channels. This receiver supports the ICD-GPS-153 protocol with PVT, PR/DR and Channel/Satellite/SAASM Status outputs. It has a hot start time of 8 seconds (direct-Y acquisition) and a position error of less than 3 m (1 sigma SEP). |
| |
Download Datasheet
Product Details | |
|
|
|
| Handheld M-Code GPS Receiver for Mission-Critical Applications | |
GNSS Module
from BAE Systems
|
| The NavGuide from BAE Systems is a Handheld GPS Receiver that has been built for vehiclular, handheld, and sensors operating in mission-critical environments. It is a portable and versatile solution that provides users with a moving map, situational awareness capabilities, and waypoint navigation, all while meeting environmental requirements and providing M-code enhanced jamming and spoofing protection. |
| |
Download Datasheet
Product Details | |
|
|
|
| MIL-STD-348B Standard 2.92 mm RF Connectors from DC to 40 GHz | |
RF Connector
from Hirose Electronic
|
| The 2.92 mm Series RF Connectors from Hirose Electronic operate from DC to 40 GHz. They conform to MIL-STD- 348B standards and provide excellent high-frequency performance with consistent mounting quality. The board receptacles of these connectors are screw-mounted instead of being soldered to the board and can be reused which reduces the mounting complexity. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 W RF Circulator from 17.3 to 22 GHz for Military Applications | |
RF & Microwave Circulator
from DiTom Microwave
|
| The DHC1722 from DiTom Microwave is an RF Circulator that operates from 17.3 to 22 GHz. It can handle an average input power of up to 10 W and a peak input power of 30 W. This isolator provides more than 20 dB of isolation and has an insertion loss of less than 0.5 dB. It is available in a passivated stainless-steel module that measures 0.5 x 0.7 x 0.5 inches with SMA (male/female) connectors and is suitable for high-reliability military applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ku-band Flat-Panel AESA for Commercial and Military Mobile Communications | |
Electronically Steerable Antenna
from Hanwha Phasor
|
| The Phasor L3300B from Hanwha Phasor is a Ku-band Active Electronically Steered Antenna (AESA) for commercial and military mobile communication applications. This enterprise-grade antenna utilizes dual simultaneous receive channels and can form connections with new satellites before breaking its current connection. It can connect to geostationary satellites (GEO) and low-earth orbiting (LEO) constellations and is compliant with OneWeb. |
| |
Download Datasheet
Product Details | |
|
|
|
| Microwave Signal Generator from 100 kHz to 20 GHz | |
Signal Generator
from AnaPico
|
| The APMQS20 from AnaPico is a Signal Generator with a frequency range from 100 kHz to 20 GHz. This module has been designed to replace the QuickSyn FSW-0020 frequency synthesizer, which was phased out by NI a few years ago. AnaPico’s APMQS20 serves as a drop-in replacement, providing an uncomplicated transition for QuickSyn users and ensuring uninterrupted performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 dB Dual-Directional Coupler from 0.7 to 14 GHz | |
Dual Directional Coupler
from KRYTAR
|
| The 500714010 from Krytar is a Dual-Directional Coupler that operates from 0.7 to 14 GHz. This 10 dB coupler provides a directivity of more than 12 dB and has a frequency sensitivity of ±0.85 dB. It can handle an average input power of up to 20 W and a peak input power of 3 kW. This 4-port coupler is a combination of two 3-port couplers having their main lines cascaded and enables monitoring of forward and reflected power. |
| |
Download Datasheet
Product Details | |
|
|
|
| MIL-STD-883 Compliant Voltage Controlled Oscillator from 980 to 1215 MHz | |
Voltage Controlled Oscillator
from Rakon
|
| The RVC1414D from Rakon is a Voltage Controlled Oscillator (VCO) that operates from 980 to 1215 MHz. It has a control voltage from 0 to 10 V, provides an output with power level of more than 12 dBm and a phase noise of -90 dBc/Hz (@50 kHz offset). This oscillator has a unique design that enhances system signal integrity and supports clock signals for field-programmable gate arrays (FPGAs). |
| |
Download Datasheet
Product Details | |
|
|
|
| 78 Ohm Terminations with TRB Plug from DC to 500 MHz | |
Termination
from Fairview Microwave
|
| The FMTR10-06403-0XX Series from Fairview Microwave are Terminations that operate from DC to 500 MHz. They have a Gold-plated Bronze MIL-STD-1553 TRB 3-slot plug connector and an impedance of 78 Ohms. These terminations are available in a Nickel-plated Brass housing and measures (Dia) 14.2 x (L) 43.2 mm. They are available with a 3 or 6-inch or no chain. |
| |
Download Datasheet
Product Details | |
|
